Product Description:

The MAF130D-0150-FQ-C0-AP0-35-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat in the MAF IndraDyn Asynchronous Motors series. It converts drive controller output into mechanical rotation for conveyor sections, presses, and other cyclic motion axes used in automated lines. The D-length, size-130 frame combines an internal cooling jacket with a compact envelope, allowing the machine builder to place the unit inside sealed cabinets where forced air is unavailable while still maintaining continuous torque delivery.

The stator windings are cooled by a closed-loop liquid circuit that connects through a 1/4 inch thread on the housing, so installation only needs a matching pipe fitting and no external fan. At its rated speed of 1500 rpm, the winding temperature remains within the Class F limit because coolant removes losses directly at the copper. Position feedback is supplied by an incremental encoder delivering 2048 increments per revolution; the sensor runs from a regulated 5 V supply and interfaces with standard IndraDrive inputs. A sealed enclosure rated IP65 blocks dust and high-pressure water jets, allowing the unit to operate beside cutting fluids or washdown zones.

Mechanical integration is simplified by flange and foot mounting, and power and feedback conductors exit on the A-side through a coded connector. The shaft uses a keyway and is balanced with a complete key, while a shaft sealing ring helps keep coolant or oil from entering the bearing cavity. Standard rolling bearings together with vibration level A meet DIN EN 60034-14, which helps reduce resonance on light frames. Operation is permitted between 0–40 °C, the motor is supplied without a holding brake, and winding code 0150 identifies the stator design used for drives matched to this torque class.