Product Description:

The MAF130D-0100-FQ-S2-EH0-35-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled drive, it is installed in automated machinery that needs constant torque with limited heat emission, and it integrates through a flange-and-foot mounting pattern to provide rotary power for conveyors, extruders, or forming stations. Frame code D gives the 130 mm motor a housing length that balances torque output and inertia, while standard rolling bearings support the plain shaft without additional axial options.

The stator jacket uses liquid cooling, and coolant enters through a connection thread sized for 1/4-inch fittings to help keep the windings within the F-class insulation range. A rotatable terminal box on the A-side houses the mains leads, so the power connection can be aligned to the available panel space. Rotor position is supplied to the controller by a single-turn absolute encoder that communicates over EnDat2.1; its feedback resolution is 2048 increments per revolution, and the sensing electronics require 7–12 V of supply voltage. The 0100 winding is centered on a nominal speed of 1000 rpm.

The housing has an IP65 protection rating, so dust and water jets do not impair operation, although the shaft does not include a sealing ring and the unit comes without a holding brake. Compliance with DIN EN 60034-14 places the vibration level in class A for general-purpose installations, supported by balanced bearings. Operation is specified from 0 to 40 °C, and within this range the insulation class F, the standard bearing set, and the liquid circuit support stable thermal performance. Foot or flange interfaces, together with the A-side terminal box, help simplify installation where space and conduit routing are restricted.