MAF130D-0100-FQ-S2-BH0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911344664
The Bosch Rexroth Indramat MAF130D-0100-FQ-S2-BH0-05-N1 is part of the MAF IndraDyn Asynchronous Motors series and features liquid cooling with a 1/4 inch connection thread. This motor offers flange mounting, an EnDat2.1 encoder interface at 2048 increments, and delivers a rated speed of 1000 min-1. Built with insulation class F and protection class IP65, it has a plain shaft without shaft sealing and does not include a holding brake.
Internal Product Review
The MAF130D-0100-FQ-S2-BH0-05-N1 is a liquid-cooled asynchronous housing motor designed for flange mounting. EnDat2.1 feedback with 2048 increments supports accurate speed monitoring and dependable motion control integration. IP65 protection and a 1000 min-1 rated speed make this motor a strong choice for demanding industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130D-0100-FQ-S2-BH0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat and placed within the MAF IndraDyn Asynchronous Motors series. As a three-phase drive element, the unit supplies constant torque to conveyors, presses, and similar automation axes that must deliver high power from a compact frame. Its 130 frame size with length code D integrates directly with flange-mounted gearboxes or machine plates, which helps simplify installation on production lines.
The motor reaches a nominal rotation of 1000 rpm, a speed suited to systems that need high torque at moderate rotational speed. Heat generated by the stator windings is removed through liquid cooling; coolant enters and exits through a 1/4-inch connection thread, helping maintain winding temperature within the permitted insulation limit. Feedback comes from a single-turn absolute encoder that provides 2048 increments through an EnDat 2.1 interface and operates from a 7–12 V supply, allowing the drive controller to resolve shaft position without multi-turn tracking hardware. The housing has an IP65 rating that protects internal components against dust and low-pressure water jets during routine washdown. Electrical insulation is class F, meaning the winding system tolerates up to 155 °C before thermal aging accelerates.
Mechanical integration follows a flange mounting pattern, and power is delivered through a connector on the B-side so cable runs can be routed away from the load end. The rotor operates within vibration severity grade A under DIN EN 60034-14, which helps limit transmitted oscillation to nearby machine structures. The permitted ambient operating range is 0–40 °C, after which derating is required to protect bearing life and winding insulation. The motor has a plain shaft without a sealing ring, and it has no holding brake, so static positions must be secured by external clamping or drive torque. Winding code 0100 and the specified coolant connection thread match the electrical and cooling arrangement of this motor version.
