Product Description:

The MAF130D-0100-FQ-S0-BK0-05-V1 is part of the MAF IndraDyn Asynchronous Motors series produced by Bosch Rexroth Indramat. As a liquid-cooled asynchronous housing motor, the MAF130D-0100-FQ-S0-BK0-05-V1 delivers controlled rotary motion for conveyors, presses, and rotary tables in automated cells. The unit combines a keyed shaft, a flange interface, and a sealed housing so that electrical energy from IndraDrive inverters is converted into mechanical work while occupying minimal cabinet depth. This layout makes the motor suitable for compact installations where direct machine integration is required.

It reaches a rated speed of 1000 rpm, which is the continuous operating speed at nominal torque. Heat generated in the windings is removed by liquid cooling routed through an internal jacket that terminates at a 1/4-inch connection thread, keeping temperature within the limits of Class F insulation. The enclosure carries an IP65 protection rating, so dust and water jets do not compromise operation. A 130 frame with frame-length code D provides a rigid yet compact stator core, while winding code 0100 matches the electrical characteristics expected by the designated IndraDrive amplifier. Vibration level A supports smooth running during normal asynchronous motor duty.

The rotor is supported by reinforced bearings that meet DIN EN 60034-14 vibration limits and are prebalanced with a half key to match the shaft profile. A shaft sealing ring works with the keyway to retain lubricant and help block contaminants from entering the housing. Electrical power is supplied on the B-side through a molded connector, which helps simplify cable routing in tight spaces. Mechanical installation relies on flange mounting, allowing direct coupling to gearboxes without foot adapters. The motor does not include a holding brake, so static positioning must rely on external clamps or drive torque. Permissible ambient temperature ranges from 0 °C to 40 °C.