Product Description:

The MAF130D-0100-FQ-S0-BH0-05-R1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is intended for continuous duty in industrial automation, where drive power is converted into regulated mechanical rotation. This allows conveyors, processing spindles, and auxiliary axes to maintain commanded speed and torque during operation.

This motor reaches a rated speed of 1000 rpm under nominal load. Heat generated by the stator is removed through liquid cooling, and the coolant enters the jacket through a 1/4 inch connection thread that fits standardized hydraulic fittings. The housing uses flange mounting, which supports rigid alignment to machine structures. Power is supplied on the B-side through a connector, which helps simplify cable routing. An IP65 enclosure limits the entry of dust and water jets so live parts remain protected. The motor uses a plain shaft to transmit torque without a key, and because it is supplied without a holding brake, external locking is needed if the load must remain fixed at standstill. The lack of a shaft sealing ring reduces drag, but external sealing is required when the motor drives fluid-filled mechanisms. Class F insulation permits winding temperatures up to 155 °C during intermittent overload.

The motor has a frame size of 130 with length code D, and winding code 0100 matches the electrical characteristics used by compatible drive inverters. Operation is permitted within an ambient range of 0 to 40 °C, and vibration level A supports direct mounting without secondary dampers. Compliance with DIN EN 60034-14 indicates rotor balance suitable for general-purpose industrial use. The listed vibration and insulation criteria support stable operation during long production cycles.