Product Description:

The MAF130D-0100-FQ-N0-LG0-05-N1 is an asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled induction unit, it converts electrical power into continuous rotary motion for conveyor drives, presses, and other automated plant axes that need stable torque at low speed ranges. The motor integrates into closed machine frames where ambient airflow is limited, so liquid cooling manages heat while the flange interface simplifies rigid attachment to gearboxes or direct-drive shafts.

With a nominal rotor velocity of 1000 rpm, the motor is intended for processes that favor constant torque rather than high top speed. Heat generated at this operating point is removed through liquid cooling, and a 1/4-inch threaded pair on the stator housing provides the closed-loop coolant path. The enclosure carries an IP65 rating, blocking dust and low-pressure water jets so that external washdown does not disturb internal windings. Mechanical integration uses flange mounting, allowing the frame to seat against a machine plate without additional brackets. The windings use class F insulation, which supports internal temperatures up to 155 °C before degradation.

The motor uses a plain shaft output interface that pairs with keyed hubs or shrink discs, while a shaft sealing ring helps keep lubricant inside the bearing zone. It operates in ambient air from 0 to 40 °C, so the surrounding air must remain within that range to avoid derating. Dynamic behavior is rated to vibration level A under DIN EN 60034-14, making it suitable for general machinery. Electrical leads exit on the left side through a molded connector, leaving the top and right faces free for coolant hoses and feedback devices even though this model is supplied without an encoder or a holding brake.