Product Description:

The MAF130D-0100-FQ-M2-EG0-35-N3 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a flange-mountable machine for industrial duty, it converts electrical energy into controlled rotary motion for conveyor sections, extruders, and other automated axes that need steady torque at low speed. Heat is removed through an internal coolant circuit rather than external airflow, which supports use inside cabinets or in areas with limited ventilation. Its housing construction also supports direct installation on machine structures without relying on a separate airflow path around the frame.

It uses liquid cooling delivered through a connection thread that matches a 1/4 inch port, so coolant lines can be fitted without adapters. The housing meets IP65 protection, and the plain shaft uses a shaft sealing ring with a standard bearing set to help prevent fluid ingress during operation. Mechanical integration is simplified by flange and foot mounting, while the terminal box is located on the A-side and can be turned to suit cable routing. The stator uses winding code 0100 with the 130 frame size and D length, and the motor develops nominal torque at 1000 rpm. Compliance with DIN EN 60034-14 keeps vibration within level B, and the sealed shaft end helps protect internal components where process moisture may be present.

Position data comes from a multi-turn absolute encoder that communicates over EnDat2.1 and resolves each revolution into 2048 increments. Its logic supply accepts 7–12 V from the drive controller, and absolute feedback allows the drive to retain position information without relying on an incremental reference count. Insulation class F allows winding temperatures up to 155 °C, which aligns with the stated ambient range of 0 to 40 °C. Because no holding brake is fitted, the axis must rely on drive torque or external clamping when power is removed.