MAF130D-0100-FQ-M2-AG1-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911369480
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF130D-0100-FQ-M2-AG1-05-N1 is part of the MAF IndraDyn Asynchronous Motors series and features flange mounting with a motor frame size of 130. This liquid-cooled asynchronous motor offers a rated speed of 1000 min-1 and is equipped with a multi-turn absolute encoder of 2048 increments. It includes an electrically-released holding brake with 80 Nm holding torque and has IP65 protection class.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130D-0100-FQ-M2-AG1-05-N1 asynchronous motor is built by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it couples a compact stator with an external coolant circuit to support continuous industrial duty. Integrated feedback and a plain output shaft allow the unit to drive presses, extruders, or transfer lines, while its multi-turn absolute encoder supplies position data to the inverter. Through flange mounting, the motor bolts directly to a gearbox or frame, which helps maintain alignment in automated cells. The cooling layout also moves heat away from the housing so nearby machine air has less effect on steady operation.
Standard bearings support the rotor, and winding code 0100 is paired with frame size 130 and length code D to balance torque and installation space. Heat leaves the stator through liquid cooling, delivered through a 1/4 inch connection thread, and the coolant ports sit on the A-side next to the power connector so hose runs stay short. Electrical power also enters on that A-side through a sealed connector, while feedback travels over the EnDat2.1 interface at 7–12 V to report 2048 increments per revolution. Rated operation reaches 1000 rpm, and dynamic behavior remains within vibration level A under DIN EN 60034-14. This arrangement keeps cable and hose routing orderly in compact machine layouts. A shaft-sealing ring helps keep fluid away from the flange interface, and the electrically released brake disengages automatically when the drive is energized.
The brake supplies 80 Nm of static holding torque when power is removed, which helps hold suspended axes in place. The housing is rated IP65, and the insulation system uses class F materials for thermal durability inside the motor. The motor operates in ambient air from 0 to 40 °C without derating. The sealed enclosure helps keep dust and water spray away from internal parts during normal industrial use. Combined with the encoder feedback, the brake allows the axis to stop in a controlled manner and remain secure during a power-off state.
Frequently Asked Questions about MAF130D-0100-FQ-M2-AG1-05-N1:
Q: How is the MAF130D-0100-FQ-M2-AG1-05-N1 motor cooled and what cooling connection does it use?
A: The MAF130D-0100-FQ-M2-AG1-05-N1 motor is equipped with liquid cooling and uses a 1/4 inch connection thread for coolant flow.
Q: What braking system does the MAF130D-0100-FQ-M2-AG1-05-N1 feature and how much holding torque does it offer?
A: This model includes an electrically-released holding brake that provides 80 Nm of holding torque for secure positioning.
Q: What type of encoder does the MAF130D-0100-FQ-M2-AG1-05-N1 use, and what is its resolution?
A: The encoder used in this motor is a multi-turn absolute encoder with EnDat2.1 interface and a resolution of 2048 increments.
Q: What is the protection rating of the MAF130D-0100-FQ-M2-AG1-05-N1 motor?
A: With an IP65 protection class, this motor offers complete protection against dust ingress and low-pressure water jets from any direction.
Q: What type of shaft design does the MAF130D-0100-FQ-M2-AG1-05-N1 motor have?
A: The shaft on this motor is a plain shaft equipped with a sealing ring to help prevent fluid leakage and contamination.
