Product Description:

The MAF130D-0100-FQ-M2-AG0-05-V1 is an asynchronous motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Intended for inverter-fed drive trains, it converts electrical energy into steady mechanical output at low speed while accepting real-time position feedback. It supplies constant torque to conveyors, presses, and process equipment that must synchronize motion with upstream control tasks in demanding production lines. This operating profile suits machinery that needs steady low-speed output without sacrificing closed-loop coordination.

According to the type code, this motor is a liquid-cooled asynchronous housing unit. Heat is removed through liquid cooling using a 1/4-inch connection thread that accepts standard hydraulic couplings. Reinforced bearings absorb both radial and axial loads, and the stator uses winding code 0100 matched to drives with the correct impedance. Frame size 130 and length code D conform to DIN EN 60034-14, while an A-side power connector keeps cabling away from the coolant manifold. A multi-turn absolute encoder outputs 2048 increments at 7–12 V so the inverter can sustain 1000 rpm under load. The housing is sealed to IP65, which permits installation in washdown areas.

For mechanical integration, the motor uses flange mounting, and a plain shaft with a shaft sealing ring helps prevent lubricant loss during continuous duty. Windings insulated to class F tolerate elevated copper temperatures, but operation must stay within 0–40 °C ambient to maintain service life. Position data are transferred through the EnDat2.1 interface, removing the need for separate resolver wiring. The absence of a holding brake means vertical axes require external locking devices when power is removed. Dynamic balance is kept to vibration level A, which helps limit structural resonance in precision tooling and supports smoother operation in mechanically sensitive equipment.