Product Description:

The MAF130D-0100-FQ-C0-LG0-05-N1 is an asynchronous motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it supports continuous torque delivery while transferring internal losses to a coolant circuit instead of the surrounding air. The design is supplied without a holding brake, so any static load retention must be handled by mechanical locks or drive torque in the host machine. The left-side power connector also helps simplify cable routing inside compact cabinets.

The motor’s nominal operating point includes a rated speed of 1000 rpm, which is the intended operating speed under load. Thermal management relies on liquid cooling, and the housing uses a 1/4-inch connection thread that mates with closed-loop chillers so coolant flow can be controlled independently of ambient air. When assembled, the housing achieves IP65 protection, blocking dust ingress and directing splash water away from the stator laminations. Motion feedback is generated by an incremental encoder that outputs 2048 increments per revolution at a supply voltage of 5 V, allowing precise velocity regulation. Conformance with DIN EN 60034-14 keeps overall vibration within Class A, which helps limit transmitted oscillation to adjoining machine structures.

The motor uses a standard rolling bearing set, and its insulation system is classified as F, permitting winding temperatures up to 155 °C. Safe operation is restricted to an ambient range of 0–40 °C. The unit uses flange mounting and matches frame size 130 with length code D, while the left-hand connector leaves room for adjacent modules. For shaft coupling, the unit provides a plain shaft with a sealing ring that helps keep coolant or dust away from the bearing seats. The winding code 0100 aligns the stator with drive parameters so the inverter can apply the correct current limits.