Product Description:

The MAF130D-0100-FQ-C0-AH1-05-N1 is an asynchronous motor made by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It drives continuous-duty axes such as conveyors and extruders in automated lines. Its asynchronous design suits process equipment that runs for long periods under stable load conditions. Liquid passages in the housing remove heat during sustained operation, and the flange-mounted body with a smooth shaft supports direct coupling to gearboxes. The A-side power connector also helps keep cable routing straightforward in fixed installations.

With a rated speed of 1000 rpm, the rotor delivers steady output when the 0100 winding is energized by the drive. The electrically released brake provides 80 Nm of holding torque during stops. An incremental encoder supplies 2048 increments per revolution for position control through a 5 V interface, allowing the connected drive to monitor shaft rotation accurately. Heat leaves the stator through liquid cooling, so full torque can be held without external airflow. Standard bearings carry the load, and the die-cast frame has an IP65 enclosure rating for use in dusty and splash-prone areas. The motor uses frame size 130 with length code D, which keeps the housing compact while leaving room for the integrated brake and encoder.

The thermal system uses class F insulation, which allows the windings to withstand elevated operating temperatures over long duty cycles. The motor is intended for ambient conditions from 0 to 40 °C, which matches common indoor factory environments. Vibration performance is graded A under DIN EN 60034-14, helping limit dynamic forces on connected machine parts and nearby mounting structures. Because no shaft sealing ring is fitted, the surrounding machine should prevent contaminants from reaching the motor interior. Coolant connections use a 1/4 inch thread that matches common push-fit adapters.