Product Description:

The MAF130C-0250-FQ-S2-HH0-05-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled unit, it fits into closed automation cells where fan-driven air exchange is restricted. The motor serves as a rotary prime mover for drive controllers in material-handling, packaging, and metal-forming machinery, converting electrical energy into controlled mechanical rotation for precise speed regulation.

This model delivers a rated speed of 2500 rpm, allowing medium-to-high shaft velocities without oversizing the frame. Heat is removed through liquid cooling, and the ports accept a 1/4-inch connection thread that couples to cabinet chillers. The housing meets the IP65 rating, so dust and low-pressure water jets do not reach internal windings. Position data is exchanged over the EnDat2.1 interface, and the single-turn absolute encoder operates from a 7–12 V supply so the drive receives position feedback immediately after power-up. A standard rolling-element bearing set supports the rotor, and the motor is supplied without a holding brake. Mechanical vibration is limited to level A under DIN EN 60034-14, and the frame is size 130 with length code C. Power feeds through a turnable terminal box mounted on the B-side, which helps align cables inside the machine frame.

Rotor position feedback is generated at 2048 increments, which supports common servo loop update rates for mid-range drives. The motor uses flange mounting to help maintain accurate alignment at the machine interface. Class F insulation permits winding temperatures up to 155 °C before derating. Safe operation is specified for ambient air from 0 to 40 °C, matching typical production floors. Winding code 0250 identifies the stator conductor cross-section and resistance used with compatible IndraDrive inverters. The motor has a plain shaft without a sealing ring, allowing direct coupling to pulleys or couplings while keeping the shaft end simple.