Product Description:

The MAF130C-0250-FQ-S2-HG0-05-N3 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It converts inverter output into continuous rotary motion for packaging lines, transfer stations, and other automated axes that need compact motor placement and steady thermal control. As an asynchronous motor, it is intended for inverter-fed applications where controlled speed and reliable torque are required across repeated duty cycles. The housing is built for flange mounting, so the unit can be installed directly on machine structures where airflow is limited or surrounding temperatures are elevated.

The motor uses liquid cooling through threaded coolant ports to remove losses and maintain stable operation at a rated speed of 2500 rpm. An enclosure rating of IP65 helps block dust and low-pressure water jets, which supports use near machining coolant or similar industrial equipment. Position feedback is supplied by a single-turn absolute encoder with 2048 increments, and the signal is transmitted over EnDat2.1 for accurate position data. Because the encoder is absolute within one mechanical revolution, the drive receives direct position information during operation. Operation is permitted in ambient temperatures from 0 to 40 °C, and the feedback device is powered from a 7 to 12 V source.

Electrical insulation is rated to class F, allowing the winding system to withstand elevated internal temperatures under heavy load. A shaft sealing ring helps protect the motor interior, while the plain shaft transfers torque to the driven machine and dynamic behavior meets vibration level B under DIN EN 60034-14. The motor uses frame size 130 with length code C, includes standard bearings, and has a turnable terminal box on the B-side to simplify cable routing. Liquid connections use a 1/4-inch thread, and the motor is supplied without a holding brake.