Product Description:

The MAF130C-0250-FQ-S2-DH0-35-H4 is an asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. As a drive element in industrial automation, it converts electrical energy into mechanical rotation for conveyor, spindle, and process axes that need continuous torque within compact footprints. The housing routes coolant directly around the stator so higher continuous output can be achieved without increasing frame size. This type of motor is used where closed-loop speed control and reliable operation under moderate ambient conditions are priorities. That combination suits machines that must maintain steady rotation under changing load conditions while preserving installation space.

Heat is removed by liquid cooling, supplied through a connection thread that accepts a 1/4-inch fitting and supports integration with plant chiller circuits. High-speed bearings support the rated shaft velocity of 2500 rpm and help maintain smooth running during sustained operation. Position feedback is provided by an EnDat 2.1 interface; the single-turn absolute encoder delivers 2048 increments per revolution and operates from a 7 to 12 V supply. Power leads enter on the right side through a turnable terminal box, which allows cable routing to be adjusted to the machine layout. The motor is built without a holding brake, and its windings use class F insulation to tolerate higher internal temperatures during demanding duty cycles.

The mechanical envelope uses flange and foot mounting, so the motor can be fastened either to a base plate or directly to a machine wall. Frame size 130 with length code C gives a balanced ratio of torque to mass, and winding code 0250 matches drives intended for its electrical characteristics. A plain shaft is supplied without a shaft-sealing ring, and external splash resistance relies on the housing's IP65 enclosure. Operation is permitted in environments from 0 to 40 °C, and higher ambient temperatures require derating.