Product Description:

The MAF130C-0250-FQ-S2-AP0-05-N1 is an asynchronous housing motor in the MAF IndraDyn Asynchronous Motors series from Bosch Rexroth Indramat. It converts electrical power into controlled rotary motion for automated production lines, conveyors, and indexing stations that need steady torque across variable speeds. A 130-frame stator is combined with a C-length housing so the unit fits inside tight machine envelopes while still supplying the output demanded by modern drive systems. This layout is well suited to enclosed machine sections where available installation space is limited but reliable continuous motion is still required.

Thermal management is achieved through liquid cooling, and the housing uses a 1/4-inch connection port so plant piping can circulate coolant around the stator. An IP65 enclosure blocks dust ingress and water jets, allowing installation near spray zones. The rotor reaches a rated speed of 2500 rpm, giving predictable velocity under nominal load. Positional feedback is transferred over the digital EnDat 2.1 interface, and vibration behavior follows DIN EN 60034-14 with level A classification. Insulation class F windings handle elevated copper temperatures, and standard bearings support axial and radial loads during normal operation at ambient temperatures from 0 °C to 40 °C.

A single-turn absolute encoder resolves rotor position to 2048 increments and draws logic power from a 7–12 V supply delivered by the drive controller. The rotor is balanced with a complete key, and the shaft uses a sealing ring and keyway so couplings, pulleys, or gear elements can be mounted securely. The motor uses flange mounting, and the A-side power connector supports orderly cable routing where adjacent axes are installed close together. The motor does not include a holding brake, so any parked load must be secured by the driven mechanism or by drive-controlled torque.