Product Description:

The MAF130C-0250-FQ-N0-GP0-35-N3 is an induction motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled asynchronous housing motor, it is intended for equipment that requires continuous torque without the added bulk of fan-based cooling in industrial automation. The motor is suitable for use with servo inverters on conveyor lines, presses, and forming stations. Its vibration behavior follows DIN EN 60034-14, which supports stable operation in demanding motion applications.

Heat is removed by liquid cooling, routed through a connection thread that accepts 1/4 inch fittings, so the motor can connect directly to a closed-loop chiller for stable winding temperatures. Electrical leads terminate in a turnable terminal box, which allows the cable outlet to be rotated for easier routing, and the power entry is located on the left side of the housing. The enclosure is rated IP65 to help keep dust and low-pressure water jets out of the motor, while the windings use insulation class F for higher thermal endurance during operation. The motor reaches a rated speed of 2500 rpm under normal loading. It is supplied without a holding brake or encoder, uses standard bearings, relies on a threaded coolant connection, and meets vibration level B.

The motor supports flange and foot mounting, which gives flexibility for different machine layouts. Mechanical balance is provided by a rotor that is balanced with a complete key, and it works with a keyway shaft and a shaft sealing ring to help separate coolant and contaminants from internal parts. Operation is acceptable in ambient temperatures from 0 to 40 °C. The frame size is 130 with length code C for a compact axial dimension, and winding code 0250 identifies the stator configuration used for this asynchronous motor.