Product Description:

The MAF130C-0250-FQ-N0-AL0-05-N1 is an asynchronous housing motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it is intended to drive machine axes or spindles in tightly packed automation cells where forced cooling removes heat from the stator and supports stable torque output. The unit is a flange-mounted frame size 130 motor with a length code C stator stack, and power connects on the A-side through a molded connector. This arrangement keeps the installation compact for cabinet-mounted inverters and supports continuous duty on production lines.

The motor operates at a rated speed of 2500 rpm, a value chosen to match standard inverter output frequencies while keeping rotor losses low. Heat generated by the windings is removed by liquid cooling, and coolant enters and leaves through a 1/4 inch threaded port that fits common hydraulic connections. The mechanical interface uses flange mounting, allowing direct coupling to gearboxes or pumps without additional footplates. The housing is rated IP65, which helps keep dust and water jets away from internal components. The internal winding code 0250 aligns the electrical characteristics with compatible IndraDrive converters.

An insulation system rated at Class F withstands winding temperatures up to 155 °C, and a standard bearing set supports the shaft during continuous operation. The motor also follows DIN EN 60034-14 vibration requirements. Rotor balance is balanced with a half key, and the output shaft is machined with a keyway for torque transmission to couplings. Operation is permitted in ambient temperatures from 0 to 40 °C without derating when coolant flow is maintained. The design omits a shaft sealing ring, an encoder, and a holding brake.