Product Description:

The Bosch Rexroth Indramat MAF130C-0250-FQ-N0-AH0-05-N1 belongs to the MAF IndraDyn Asynchronous Motors series. This liquid-cooled asynchronous housing motor is used in industrial automation to drive conveyors, presses, and handling axes where high continuous torque and stable thermal behavior are required. Designed for integration with IndraDrive inverters, it delivers regulated mechanical power during sustained operation. As an asynchronous motor in a housing design, it is suited to machine sections that must run for long duty cycles with dependable output.

Heat is removed by liquid cooling through an internal jacket that terminates at a 1/4 inch connection thread, which simplifies hard-piped coolant lines on skids and test stands. The rotor reaches a rated speed of 2500 rpm, matched to the 0250 winding so the motor can support the intended operating range. Frame size 130 with length code C sets the motor envelope, and standard bearings support general-purpose radial loading. Installation uses flange mounting, and supply conductors are routed through a screened power connector that exits on the A-side to reduce bend radius inside control cabinets. The plain shaft has no sealing ring, the encoder pocket is not installed, and vibration is limited to level A for common balancing requirements.

The aluminum housing has an IP65 protection rating, allowing operation in dust-laden or splash-prone areas within an ambient temperature range of 0 °C to 40 °C. The unit is supplied without a holding brake, so vertical loads or parked axes require external load-holding measures when power is removed. Class F insulation permits winding temperatures up to 155 °C, supporting thermal durability during continuous use. Compliance with DIN EN 60034-14 confirms that vibration limits meet industrial criteria for category A machines. This combination of enclosure protection, insulation class, and vibration compliance supports use in demanding production equipment.