Product Description:

Bosch Rexroth Indramat supplies the MAF130C-0250-FQ-N0-AG0-05-N1 as part of the MAF IndraDyn Asynchronous Motors series. This liquid-cooled asynchronous housing motor is used where continuous torque density is needed in industrial automation equipment. The unit follows DIN EN 60034-14 for mechanical vibration limits and is built for flange installation in compact drive modules, delivering rotation to conveyors, spindles, or pumps without external gear stages. Its enclosed housing also helps conserve space in tightly arranged machine layouts. It is suitable for enclosed production equipment where steady output and compact installation are both important.

The motor reaches a rated speed of 2500 rpm, a value matched to drive controllers that supply the current profile for winding code 0250. Heat generated at that speed is removed through liquid cooling; coolant enters through a 1/4-inch connection thread and exits through the opposite port, keeping stator temperature below the Class F insulation limit. The housing has a protection rating of IP65, so dust and low-pressure water jets do not affect operation. The motor uses flange mounting, and the power lead exits on the A-side through a sealed connector. A shaft sealing ring helps keep coolant and process contaminants away from the rotor journal.

The mechanical interface is a plain shaft supported by standard rolling bearings that meet vibration level A. Combined with motor frame length code C, this arrangement reduces overhang load on coupled components. Torque is transferred through an external coupling selected for the connected load and shaft geometry. There is no encoder, so position feedback must be provided externally when the application requires it. The motor is supplied without a holding brake, which saves space in applications that rely on drive-based torque at standstill. Operation is permitted in ambient temperatures from 0 to 40 °C.