Product Description:

The MAF130C-0250-FQ-M6-HG0-05-A1 is an asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. This liquid-cooled unit is intended to drive conveyors, extruders, and other continuous-duty loads in automated lines. By combining a squirrel-cage rotor with closed-loop feedback, the motor provides regulated speed and torque while keeping surface temperature low, which makes it suitable for installations where forced airflow inside the cabinet is not practical.

Its operating speed is 2500 rpm, giving connected machinery a rotational range that balances torque and thermal load. Heat is removed by liquid cooling, and the coolant circuit connects through a 1/4 inch thread that accepts standard fittings. The housing is rated IP65, so dust and low-pressure water jets do not affect the windings or the A-side fixed bearing that carries radial and axial forces. Motion feedback uses an EnDat 2.1 interface that provides 2048 increments of position data and operates from a 7 to 12 V supply. The turnable terminal box is mounted on the B-side for the power conductors, and the flange mounting pattern matches the 130 frame size for straightforward machine integration.

The motor is supplied without a holding brake, so static positioning must be maintained by the drive or by an external lock. An encoder cable length of 15 m is permitted, allowing cabinet-level controller placement while maintaining signal integrity for the multi-turn absolute encoder approved for Ex-type zones. Thermal capability follows class F insulation and an ambient range of 0 to 40 °C, while the liquid circuit and shaft sealing ring help limit hot spots and lubricant loss. The rotor end uses a plain shaft, and the low residual imbalance meets vibration level A. Compliance with DIN EN 60034-14 confirms that the motor follows common industrial vibration and balancing requirements.