Product Description:

The MAF130C-0250-FQ-M6-GK0-35-V1 is an asynchronous motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. The unit uses a liquid-cooled housing design intended for industrial automation cells that demand steady torque output with limited thermal drift. It works with electronic drives to rotate machine tools, conveyors, or process pumps where precise speed control and continuous duty are required. By integrating a multi-turn absolute feedback system, the motor communicates exact shaft position to the controller, enabling closed-loop operation in packaging lines or assembly stations.

Heat is removed by liquid cooling through a connection thread that accepts a 1/4 inch coupling, so the stator stays within its limits during heavy cycles. Reinforced bearings tolerate higher radial loads, and the shaft uses half-key balancing with a keyway and a sealing ring to help block coolant ingress. The motor reaches 2500 rpm and is balanced to vibration grade A. A left-side, rotatable terminal box simplifies cabling, and flange and foot mounting secure the 130 frame with length code C to the machine bed. An IP65 enclosure blocks dust and directed water, and winding code 0250 matches compatible drive parameters. Feedback signals exit through an EnDat2.1 interface for synchronous position reporting.

The position transducer is a multi-turn absolute encoder for Ex-type motors, and it delivers 2048 increments per revolution while operating on 7–12 V. Its cable can extend up to 15 m without repeater hardware, maintaining signal quality toward the drive. Insulation system class F allows winding temperatures up to 155 °C, while the assembly works in ambient ranges of 0 – 40 °C. The design follows DIN EN 60034-14, so vibration limits align with category A. Because the motor is supplied without a holding brake, axis locking must be provided when power is removed.