MAF130C-0250-FQ-M2-HP0-35-V1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911378782
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF130C-0250-FQ-M2-HP0-35-V1 is a liquid-cooled asynchronous motor from the MAF IndraDyn Asynchronous Motors series with a rated speed of 2500 rpm. It features reinforced bearings, an IP65 protection class, and uses a multi-turn absolute encoder with EnDat2.1 interface and 2048 increments resolution. The motor supports flange and foot mounting and comes with a 1/4 inch liquid cooling connection thread.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130C-0250-FQ-M2-HP0-35-V1 is an asynchronous motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled housing motor, it is intended for conveyors, extruders, and other production axes that require steady torque, controlled heating, and repeatable speed. In this role, the motor converts electrical input into controlled rotary motion for process equipment and material-handling machinery. Frame size 130 with length code C fits common machine openings, and the motor supports precise speed control in industrial automation systems that operate over long duty cycles.
The motor reaches a rated shaft speed of 2500 rpm. The winding code 0250 identifies the electrical winding used in this frame, and the shaft is balanced with a full key to reduce residual vibration during rotation. Heat is removed by liquid cooling at the stator, and coolant enters through a 1/4 inch connection thread before leaving on the opposite side, so external airflow is unnecessary. A rotatable terminal box on the B-side carries the three-phase power conductors, while reinforced bearings tolerate radial loads generated by flange and foot mounting. Protection is supported by an IP65 housing and a shaft sealing ring, allowing operation where splashing coolant or dust is present. Motion feedback is provided by a multi-turn absolute encoder that communicates over EnDat 2.1 and operates from 7–12 V. The motor is supplied without a holding brake, so load retention must be provided externally when power is removed.
The encoder provides 2048 increments per revolution, giving fine resolution for vector control. The windings use a Class F insulation system, which permits internal temperatures up to 155 °C while the permissible ambient temperature remains between 0 °C and 40 °C. Compliance with DIN EN 60034-14 confirms vibration level A for the motor. The reinforced bearing set also helps restrain oscillations, and the keyway shaft supports direct mechanical power transmission to the driven load.
Frequently Asked Questions about MAF130C-0250-FQ-M2-HP0-35-V1:
Q: What kind of encoder system is featured on the MAF130C-0250-FQ-M2-HP0-35-V1 motor?
A: The MAF130C-0250-FQ-M2-HP0-35-V1 motor uses a multi-turn absolute encoder with EnDat2.1 interface and a resolution of 2048 increments.
Q: What type of bearings are used in the MAF130C-0250-FQ-M2-HP0-35-V1?
A: This motor is equipped with reinforced bearings for enhanced durability under demanding operating conditions.
Q: What cooling system is implemented on the MAF130C-0250-FQ-M2-HP0-35-V1?
A: The MAF130C-0250-FQ-M2-HP0-35-V1 relies on liquid cooling with a 1/4 inch connection thread for thermal management.
Q: What is the rated speed of the MAF130C-0250-FQ-M2-HP0-35-V1 motor?
A: It has a rated speed of 2500 min-1, supporting efficient and stable motor performance.
Q: What level of environmental protection does the MAF130C-0250-FQ-M2-HP0-35-V1 offer?
A: The motor features IP65 protection class, safeguarding it against dust and low-pressure water jets from any direction.
