MAF130C-0250-FQ-M2-HP0-35-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911379311
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF130C-0250-FQ-M2-HP0-35-N1 is part of the MAF IndraDyn Asynchronous Motors series and features a frame size of 130 with flange and foot mounting. It is a liquid-cooled asynchronous housing motor with a rated speed of 2500 min-1, IP65 protection class, and an insulation class of F. The motor includes a multi-turn absolute encoder with EnDat2.1 interface and 2048 increments resolution, and comes with a turnable terminal box for the power connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130C-0250-FQ-M2-HP0-35-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Designed as a drive element in industrial automation, it converts three-phase electrical power into controlled mechanical rotation for conveyors, presses, and other high-duty machines that require sustained thermal stability. Its 130 mm frame size and C length code keep the package compact while allowing direct coupling to gearboxes or load shafts in standard IEC layouts. This format is well suited to applications that need continuous operation and steady output without adding unnecessary bulk around the drive axis.
Primary thermal management is achieved through liquid cooling, permitting high load factors without exceeding insulation class F limits. A dedicated coolant inlet is provided through a 1/4-inch thread, making the circuit compatible with standard industrial fittings. Motion feedback comes from a multi-turn absolute encoder with 2048 increments, delivering fine position data to the drive for closed-loop control. Communication with the controller is handled by the EnDat 2.1 serial interface, which carries encoder data in a compact connection layout. Mechanical power is developed up to the rated speed of 2500 rpm, and the enclosure reaches IP65 protection to help keep dust and low-pressure water jets away from internal motor components during washdown cycles.
Encoder electronics draw 7–12 V, a low supply range that minimizes heat inside the sensor head and aligns with common Rexroth drive amplifiers. Installation is permitted in ambient temperatures from 0 to 40 °C, matching the normal operating range of many production environments. The motor uses flange and foot mounting, and it also has a balanced shaft with a complete key and a shaft sealing ring for secure mechanical integration. A rotatable terminal box on the B side simplifies power entry, and the motor is supplied without a holding brake to keep system inertia low during rapid speed changes.
Frequently Asked Questions about MAF130C-0250-FQ-M2-HP0-35-N1:
Q: What type of cooling is used on the MAF130C-0250-FQ-M2-HP0-35-N1 motor?
A: The MAF130C-0250-FQ-M2-HP0-35-N1 uses a liquid cooling system with a 1/4 inch connection thread.
Q: What is the encoder type and resolution of the MAF130C-0250-FQ-M2-HP0-35-N1?
A: This motor is equipped with a multi-turn absolute encoder offering a resolution of 2048 increments.
Q: What is the rated speed of the MAF130C-0250-FQ-M2-HP0-35-N1 motor?
A: The rated speed for this model is 2500 min-1.
Q: Where is the power connection located on the MAF130C-0250-FQ-M2-HP0-35-N1, and what type is it?
A: The power connection on this motor is located on the B-Side with a turnable terminal box.
Q: What protection class does the MAF130C-0250-FQ-M2-HP0-35-N1 motor have?
A: This motor holds an IP65 protection rating, making it resistant to dust and water jets.
