Product Description:

The MAF130C-0250-FQ-M2-HH0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It uses flange mounting, so the stator housing mates directly with a driven machine frame and maintains accurate alignment at the mounting face. The motor has frame size 130 and frame length C, which set the mechanical envelope within the series and provide room for the cooling jacket around the stator. Standard bearings support normal radial and axial loads in constant-duty positioning and transport axes used in automated production.

Liquid cooling flows through an internal jacket and exits through a 1/4-inch connection thread at the housing. This cooling method keeps the windings within their temperature limit when the rotor turns at a rated speed of 2500 rpm under continuous operation. The feedback system uses a multi-turn absolute encoder with 2048 increments per revolution, communicates over EnDat2.1, and operates on 7–12 V. These encoder signals give the drive controller high-resolution position data for closed-loop regulation and stable speed control. Power conductors terminate in a turnable terminal box on the B-side, allowing the box to be oriented after installation. The windings use code 0250, and the rotor balance meets vibration grade A.

The motor is supplied without a holding brake, so external mechanical retention is required for vertical loads during power-off. Stator insulation uses class F, and operation is permitted in ambient temperatures from 0 – 40 °C. A protection rating of IP65 blocks dust ingress and low-pressure water jets during normal industrial use. The motor uses a plain shaft and does not include a shaft sealing ring, which helps reduce friction at the output end. Compliance with DIN EN 60034-14 governs the permitted vibration behavior for this frame.