Product Description:

The MAF130C-0250-FQ-C0-HH0-05-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is selected for conveyor lines, extruders, and test stands where the drive must supply steady mechanical power and accept precise speed commands from a matched inverter. Integrated feedback electronics help the controller maintain accurate speed regulation and consistent motion during operation. This motor is intended for applications that require continuous duty and stable torque under changing process loads.

Cooling is handled by a closed circuit that circulates coolant through the stator jacket; this method is identified as liquid cooling and uses a 1/4-inch connection thread on the housing. The motor uses flange mounting, and electrical power reaches the windings through a turnable terminal box on side B. A protection rating of IP65 keeps the housing dust-tight and protects it against water jets during washdown cycles. Motion feedback comes from an incremental encoder that delivers 2048 increments per revolution, enabling fine speed control. When paired with a suitable drive, the motor runs at a rated speed of 2500 rpm while the cooling loop maintains thermal stability. The turnable terminal box also helps route power cables to suit the machine layout.

The motor complies with DIN EN 60034-14, so its rotor balance meets Vibration Level A when supported by standard rolling bearings. The plain shaft is supplied without a shaft sealing ring, and the motor has no holding brake. Frame size 130 with length C identifies the stator length used with winding code 0250. Thermal insulation is class F, allowing the windings to tolerate elevated temperatures when the ambient temperature remains between 0 and 40 °C. The encoder electronics operate from a 5 V supply.