Product Description:

The Bosch Rexroth Indramat MAF130C-0200-FR-M2-KP5-05-N1 is an asynchronous motor in the MAF IndraDyn Asynchronous Motors series. This liquid-cooled housing motor is intended to drive machinery that must sustain constant torque at moderate speed while keeping thermal load away from the work area. In an automation cell, it mounts on a flange, connects to an external liquid circuit, and drives gearboxes or belt stages that require precise position feedback from its integrated multi-turn encoder. The integrated feedback system helps the drive monitor shaft position during speed changes and load variations.

Rated speed reaches 2000 rpm, which sets the mechanical output limit for continuous operation with winding code 0200. Heat is removed through liquid cooling; coolant enters and leaves through an enclosed rapid-action coupling sized at 1/4 inch, so the cooling circuit can be connected quickly. The housing meets IP65, blocking dust and low-pressure water jets when the conduit fittings are tightened. The windings use class F insulation, which permits winding temperatures up to 155 °C and supports operation in ambient temperatures from 0 to 40 °C.

The electrically clamped brake supplies 100 Nm of static holding torque, so vertical axes can remain fixed when the inverter is de-energized. Position data are sent through the EnDat2.1 interface; the multi-turn encoder provides 2048 increments per revolution and operates from a 7–12 V supply, giving the controller absolute rotor position after power cycling. This allows the control system to retain position reference without a homing move after power is restored. Additional features include shaft balancing with a full key, a sealing ring that protects the bearing cavity, vibration level A per DIN EN 60034-14, and a C-length 130-frame mechanical envelope for standard installation space.