Product Description:

The MAF130C-0200-FQ-S2-HH0-35-N1 is a liquid-cooled asynchronous housing motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. By combining an integral coolant circuit with a compact IEC flange, the unit supplies constant torque for conveyors, test rigs, and similar closed-loop drive axes. Its design goal is straightforward: convert electrical power into controlled mechanical rotation while maintaining thermal stability during continuous industrial duty.

The motor employs liquid cooling routed through ports that use a connection thread of 1/4 inch, allowing direct integration with plant chillers and stable heat removal during continuous duty. Rotor position data is delivered over the EnDat2.1 digital interface, and the single-turn absolute encoder resolves shaft angle into 2048 increments from a supply of 7–12 V. Electrical termination is handled through a turnable terminal box on the B-side, so the power cable can be oriented to suit cabinet layouts without placing excess twist on the lead. Flange and foot mounting options, together with the plain shaft and standard bearings, support either horizontal or vertical installation. The 0200 winding works with vibration level A to limit dynamic forces on precision couplings.

Mechanical holding is delegated to the drive itself because the motor is supplied without a holding brake; likewise, there is no shaft sealing ring, so external protection may be needed where fluid splash is expected. Class F insulation is paired with an IP65 housing, which resists dust and low-pressure water jets. During operation the rotor reaches a rated speed of 2000 rpm with low transmitted vibration. Continuous service is permitted in ambient conditions from 0 to 40 °C, and frame length C sets the motor's axial size.