MAF130C-0200-FQ-S2-DH0-35-V1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911335279
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF130C-0200-FQ-S2-DH0-35-V1 is a liquid-cooled asynchronous motor from the MAF IndraDyn Asynchronous Motors series. It features a flange and foot mounting style, reinforced bearings, and an IP65 protection class. The motor uses a single-turn absolute EnDat2.1 encoder with 2048 increments and operates at a rated speed of 2000 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130C-0200-FQ-S2-DH0-35-V1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled unit, it serves continuous-duty axes in automated production cells by converting drive power into precise rotary motion. Its flange and foot mounting arrangement lets machine designers secure the motor directly to frames or bases without extra adapters, supporting compact assembly layouts in conveyors, presses, and forming stations.
Heat is extracted through a cooling circuit that attaches with a connection thread sized 1/4 inch, while the turnable terminal box on the right side simplifies mains wiring. Condition monitoring is supported by a single-turn absolute encoder that delivers positional data over the EnDat2.1 interface at 2048 increments resolution and operates from a supply of 7–12 V. The motor housing is sealed to IP65, and reinforced bearings tolerate increased radial loads during high-cycle operation. There is no holding brake, so static load retention must be handled by the drive or the mechanism. Vibration level A is met, and construction follows DIN EN 60034-14 for balance quality.
The electrical core is wound to code 0200 and paired with a motor frame size of 130 and length code C, giving a compact stator that spins at a rated speed of 2000 min⁻¹. Class-F insulation tolerates winding temperatures up to 155 °C; the designation is highlighted as Class F. Operation is specified for ambient temperatures between 0 °C and 40 °C without output derating. The plain shaft couples to gears or pulleys through frictional fits, and the absence of a shaft sealing ring limits the motor to clean-lubricant environments. These mechanical features simplify integration with gearboxes or belt drives.
Frequently Asked Questions about MAF130C-0200-FQ-S2-DH0-35-V1:
Q: What type of bearings are used in the MAF130C-0200-FQ-S2-DH0-35-V1 motor?
A: This motor uses reinforced bearings to withstand higher radial loads and enhance operational lifespan.
Q: What cooling connection type and size does the MAF130C-0200-FQ-S2-DH0-35-V1 motor support?
A: The cooling system requires a 1/4 inch connection thread for liquid cooling integration.
Q: What kind of encoder and interface are used in the MAF130C-0200-FQ-S2-DH0-35-V1 motor?
A: An EnDat2.1 interface and a 2048 increment single-turn absolute encoder are featured on this model.
Q: What is the acceptable ambient temperature range for operating the MAF130C-0200-FQ-S2-DH0-35-V1?
A: The permissible ambient temperature range for this model is 0 to 40 °C.
Q: What protection class does the MAF130C-0200-FQ-S2-DH0-35-V1 motor offer?
A: This unit provides IP65 protection, offering dust-tight operation and protection against low-pressure water jets.
