Product Description:

The MAF130C-0200-FQ-S2-DH0-35-N1 belongs to the MAF IndraDyn Asynchronous Motors series produced by Bosch Rexroth Indramat. As a liquid-cooled asynchronous housing motor, it delivers continuous torque in compact automation modules where ambient airflow is restricted, such as enclosed machining centers and test rigs. Its housing-style design suits machine layouts that need steady output in sealed spaces and around nearby components that limit free air movement. Electrical windings follow code 0200, and the motor accepts flange or foot mounting on the machine bed.

This model relies on liquid cooling circulated through a 1/4-inch connection thread cut directly into the end shield. A standard bearing set supports radial and axial loads, and the plain shaft is supplied without a sealing ring to reduce friction losses. The encoder system is a single-turn absolute type, and its EnDat 2.1 interface outputs 2048 increments while operating on a 7–12 V supply. Because the motor is delivered without a holding brake, external mechanical locking is required when power is removed. Power enters from the right side through a turnable terminal box, which simplifies cable routing in tight cabinets. Housing integrity is confirmed by the IP65 protection class, and the rotor can maintain a rated speed of 2000 rpm without derating under these conditions.

The motor uses class F insulation, which allows higher winding temperatures and works with the liquid circuit to manage heat. Reliable service is expected at ambient temperatures from 0 to 40 °C, which matches common plant room conditions. This temperature range supports indoor industrial use where coolant flow is maintained and surrounding air remains within normal operating conditions. Dynamic balance meets vibration level A, helping reduce vibration during operation and supporting bearing life. The motor uses frame length code C on a 130 mm frame, which sets the installation envelope. Its design follows DIN EN 60034-14 for vibration evaluation and testing.