Product Description:

The industrial asynchronous housing motor MAF130C-0200-FQ-S2-BQ1-35-V1 is produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It supplies continuous rotary drive for automated machinery that demands high thermal stability and compact installation footprints. The housing and internal architecture are intended for precise motion tasks in production cells that cannot accommodate excess heat from surface-cooled machines. That arrangement helps the motor fit densely packed equipment where nearby components leave little room for surface airflow.

Heat is removed by liquid cooling, implemented through a stainless connection thread that accepts a 1/4 inch coupling for a closed-loop coolant circuit. The stator winding follows code 0200 and uses class F insulation, which allows a winding temperature up to 155 °C. Electrical energy is delivered through a connector on the B-side, so cabling exits away from the load face. The rotor is monitored by an EnDat 2.1 feedback channel, and its single-turn absolute encoder provides 2048 increments per revolution from a 7 to 12 V supply. An electrically released brake supplies 80 Nm of static holding torque, which helps hold a vertical axis when power is removed. Frame size 130 with length code C keeps the motor compact while preserving the thermal mass needed for continuous duty.

System mounting follows flange and foot mounting, and reinforced bearings withstand axial and radial forces transmitted through a shaft cut with a keyway. The keyed shaft supports positive torque transfer to couplings and gear inputs. Dynamic balance is listed as balanced with a complete key, which helps reduce residual vibration to level A under DIN EN 60034-14. External ingress is limited by an IP65 enclosure, and because there is no shaft sealing ring, any added sealing must be provided by the coupled machine. The motor reaches a rated speed of 2000 rpm and is intended for ambient temperatures from 0 to 40 °C.