Product Description:

The MAF130C-0200-FQ-S2-BL0-35-N3 is a liquid-cooled asynchronous housing motor manufactured by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. It converts electrical energy into regulated rotary motion for conveyors, presses, and packaging equipment in automated production lines. Coolant channels built into the frame let the motor sustain rated output where ambient airflow is limited. This housing motor layout also supports installation close to the driven machine while keeping heat removal independent of surrounding air movement.

The motor uses liquid cooling to carry heat away from the stator windings, so continuous current can be delivered without thermal derating. Rotor position feedback is exchanged through an EnDat2.1 interface that transmits absolute position data in digital form. The single-turn sensor provides 2048 increments of resolution, which supports accurate speed regulation during indexing or positioning tasks. The enclosure has an IP65 rating that protects internal components from dust and low-pressure water jets, allowing installation close to process machinery. The rated mechanical speed is 2000 rpm, which places the motor in a nominal operating range used by the drive controller.

Coolant is connected through a 1/4 inch thread, enabling direct attachment to common industrial piping. The output shaft is balanced with a half key, which helps limit vibration when the motor is coupled to external loads. Permissible operation covers ambient temperatures from 0 to 40 °C, which suits standard shop-floor conditions without additional heating. Compliance with DIN EN 60034-14 aligns the motor with established vibration requirements. Flange and foot mounting surfaces support common machine layouts, and the B-side power connector keeps cable routing at one end of the housing. The motor also uses standard bearings and class F insulation, operates with vibration level B, and is supplied without a holding brake or a shaft sealing ring.