MAF130C-0200-FQ-S2-BH0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911335292
The Bosch Rexroth Indramat MAF130C-0200-FQ-S2-BH0-05-N1 is a liquid-cooled asynchronous motor with flange mounting and a plain shaft, part of the MAF IndraDyn Asynchronous Motors series. It has a rated speed of 2000 min-1, a protection class of IP65, and features an EnDat2.1 single-turn absolute encoder with 2048 increments. The motor uses a standard bearing type and operates within an ambient temperature range of 0 to 40 degrees Celsius.
Internal Product Review
The MAF130C-0200-FQ-S2-BH0-05-N1 is a liquid-cooled asynchronous housing motor rated for 2000 min-1. EnDat2.1 feedback and 2048-increment resolution support precise motion control and dependable machine integration. IP65 protection makes this motor an excellent choice for demanding installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130C-0200-FQ-S2-BH0-05-N1 is a liquid-cooled asynchronous housing motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Designed for flange mounting, the plain-shaft unit works with an inverter to drive automated machinery that requires continuous torque in a compact 130 mm frame. A closed coolant jacket integrated into the housing removes heat directly from the windings, supporting industrial automation cycles that run near the thermal limits of insulation class F without adding external fan noise. This arrangement is well suited to enclosed machine spaces where forced-air cooling would increase noise or draw contaminants across the motor surface.
The cooling circuit uses a connection thread measuring 1/4 inch, and the internal channels provide liquid cooling to keep stator temperature within class F limits. Power is supplied through a connector on side B, while standard bearings handle the radial and axial forces produced by the C-length frame with winding code 0200. Position feedback is provided by a single-turn absolute encoder that delivers 2048 increments over the EnDat2.1 digital interface and operates on 7–12 V. This encoder allows the drive to monitor rotor position continuously for accurate speed regulation and stable closed-loop response. A sealed metal housing and gasketed service covers achieve an ingress rating of IP65, allowing installation in areas exposed to oil mist or cleaning fluids.
The motor reaches a rated speed of 2000 rpm, giving moderate-inertia loads consistent velocity under closed-loop control. Compliance with DIN EN 60034-14 class A vibration limits reduces transmitted oscillation to connected mechanics during operation. Permissible ambient operation spans 0 to 40 °C, and the design omits a holding brake and a shaft sealing ring to minimize drag on the plain shaft. It uses a standard vibration-grade bearing set, meets frame code C envelope dimensions, and mounts through an IEC-pattern flange for use in machine tools, packaging lines, or handling modules. Because no holding brake is fitted, any load that must remain stationary after power removal requires external retention or drive-produced torque while energized.
