Product Description:

The MAF130C-0200-FQ-S0-AG0-05-V2 is an asynchronous motor produced by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. It is designed for drive axes that need tight speed regulation and stable thermal behavior during continuous operation. The liquid-cooled housing removes heat directly from the stator, which helps the motor maintain consistent output in demanding automation equipment. Its 130 frame platform with a C-length body keeps the unit compact enough for machine layouts where installation space is limited.

In continuous operation, the motor reaches a rated speed of 2000 rpm, which supports steady shaft motion without thermal derating under normal conditions. Heat is removed by liquid cooling through a 1/4 inch connection thread, so the cooling circuit can be integrated with standard metal fittings. Electrical power enters on the A-side through a connector, which supports orderly cable routing in enclosed machine spaces. The stator uses flange mounting for accurate alignment against a gearbox or machine plate. A plain shaft with an integrated sealing ring helps separate internal lubricants from the surrounding work area and supports clean mechanical coupling.

The enclosure is rated to IP65, which keeps dust and low-pressure water jets away from internal components during operation. Approved ambient temperatures range from 0 to 40 °C, allowing use in common indoor industrial environments without added external cooling hardware. Rotor loads are supported by reinforced bearings, which improve durability under higher radial and axial demands. The winding system uses insulation class F, allowing elevated internal temperatures during short load peaks. Because the motor is supplied without a holding brake, static torque must be provided by the drive or by an external mechanical device when the axis is stopped.