Product Description:

The MAF130C-0200-FQ-N0-AG0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat and supplied within the MAF IndraDyn Asynchronous Motors series. As an integrated drive element, the unit supplies regulated rotary power for industrial automation lines that must dissipate continuous thermal loads while maintaining consistent torque and speed profiles. It is suited to machines that run for long cycles and require stable motor output under steady process loads. Its enclosed motor housing also supports installation where compact mechanical integration is important.

The motor reaches a rated speed of 2000 rpm, which sets the operating limit for the connected inverter. Heat is removed by a closed jacket that uses liquid cooling, and coolant enters through a 1/4 inch connection thread on the housing at the power end. The sealing system meets IP65, so dust and low-pressure water jets do not interrupt operation. Class F insulation allows the stator windings to withstand a higher thermal load before insulation aging becomes a concern. A standard bearing arrangement supports the rotor, vibration level A keeps displacement within limits for precision machinery, and electrical power is delivered through a shielded connector on the A-side. The winding code 0200, frame size 130, and length code C set the electromagnetic layout and stack height.

Mechanical integration is performed with flange mounting, enabling direct coupling to gearboxes or driven equipment. Output torque is transferred by a plain shaft with an integral shaft sealing ring that helps retain internal media and exclude contaminants. The motor is intended to operate in ambient temperatures of 0 – 40 °C, and it conforms to DIN EN 60034-14 for balance quality. An encoder is not installed, so position feedback must be provided externally if required. The unit is also supplied without a holding brake, so load retention must be handled by the drive or by external mechanical means.