Product Description:

The MAF130C-0200-FQ-M7-LF0-05-A1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. The motor serves as a compact drive element for axes that need constant torque at moderate speed while minimizing heat inside the machine enclosure. It couples directly to equipment through its plain shaft and uses a flange interface to transfer torque into gearboxes, conveyor rolls, or pump impellers. With an A-sided fixed bearing, the rotor position is held precisely to support radial loads in packaging and forming machines.

At a rated speed of 2000 rpm, the machine can deliver its nominal output while remaining within the motor’s thermal limits. Heat is removed through liquid cooling, and the coolant is routed by a 1/4 inch connection thread for integration with standard industrial chillers. The stator windings use insulation class F, which allows higher winding temperatures during intermittent peaks. Mechanical attachment relies on flange mounting, which secures the 130 mm frame to a machine wall and helps maintain alignment with driven elements. The motor uses winding code 0200, so the drive controller must match this current and impedance profile for proper torque production. The left-side power connector helps simplify cable routing inside multi-axis cabinets.

The housing has a protection rating of IP65, which prevents dust ingress and water jets from reaching live parts. A labyrinth seal on the shaft helps keep coolant or process fluid out of the bearing chamber. Operation is permitted in an ambient range of 0 to 40 °C, which suits closed production floors with temperature control. Compliance with DIN EN 60034-14 vibration level A keeps dynamic loads low, and the cooling layout with threaded connections leaves external surfaces clear without requiring hose removal for access.