Product Description:

The MAF130C-0200-FQ-M7-AH0-05-A1 is a liquid-cooled asynchronous housing motor designed by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is built for integration into industrial drive systems that need constant torque, stable operation, and minimal thermal drift during long duty cycles. A frame size of 130 and length code C give the unit a compact profile suited to flange-mounted installations in machine tools and continuous-duty pump stations.

Thermal management is handled by liquid cooling through a connection thread that accepts a 1/4-inch fitting, allowing closed-loop chillers to keep stator temperatures stable. Under nominal load, the rotor reaches a rated speed of 2000 rpm, and the enclosure meets IP65 protection so dust ingress and low-pressure water jets do not reach the internal windings. All conductors exit on the A-side through a sealed connector, and the insulation is rated to Class F, allowing continuous operation up to 155 °C winding temperature without loss of dielectric strength. Mechanical attachment uses flange mounting, and the drive end has a plain shaft so couplings or pulleys can be clamped directly. A shaft sealing ring is omitted to eliminate rubber wear in high-temperature coolant environments, and the design follows DIN EN 60034-14 for balanced vibration limits.

A fixed bearing on the A-side supports axial loads from thrust couplings while maintaining radial alignment during speed changes. Dynamic behavior is categorized under vibration level A, which suits general-purpose machine requirements, and the motor operates reliably in ambient temperatures from 0 to 40 °C. Winding code 0200 identifies the stator slot fill used for this electrical configuration. The motor is supplied without a holding brake, so external braking or drive torque must secure the load during power-off conditions.