Product Description:

The MAF130C-0200-FQ-M2-RP0-35-V1 is an asynchronous drive motor manufactured by Bosch Rexroth Indramat and assigned to the MAF IndraDyn Asynchronous Motors series. Intended for industrial automation axes that run for long intervals, it combines a compact 130-frame housing with a C-length stator and accepts liquid circulation through an internal jacket so heat can be removed without external fans. This arrangement allows the motor to serve conveyors, extruders, or forming stations that require steady torque in restricted enclosures.

The stator uses liquid cooling, and the coolant passes through a dedicated connection thread with a port size of 1/4 inch, simplifying hose selection. Electrical feedback is provided by a multi-turn absolute encoder that communicates over EnDat2.1; the sensor operates on 7–12 V and resolves position into 2048 increments for precise closed-loop control. Power conductors terminate on the right side through a heavy-duty connector, while flange and foot mounting holes provide flexibility during machine layout. Internally, winding code 0200 is matched to the 130 mm frame to balance current density with thermal limits, and F-class insulation withstands elevated winding temperatures. The shaft has a keyway, is balanced with the complete key, and uses a sealing ring to keep coolant or oil mist out of the bearing chamber.

The enclosure is rated IP65, which blocks dust and low-pressure water jets. During operation, the rotor reaches a rated speed of 2000 rpm, and reinforced bearings support extended service life. The motor follows DIN EN 60034-14 balancing criteria, helping maintain smooth rotation across its 0 to 40 °C ambient range. It is supplied without a holding brake and relies on liquid cooling rather than airflow. The motor can be installed on a flange plate or on foot mounts without changing its sealing or vibration characteristics.