Product Description:

The MAF130C-0200-FQ-M2-BH0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It is intended for continuous duty in industrial automation. The unit converts electrical energy into controlled rotary motion for conveyors, tool spindles, and pumps where compact thermal management is required. This motor type is often selected when the drive system must fit into tight machine spaces without sacrificing continuous performance. Its asynchronous design supports stable operation in applications that run for long periods and need consistent output.

It delivers a rated speed of 2000 rpm, providing moderate shaft velocity that fits mid-range machining and handling cycles. Heat generated by the windings is removed through closed-loop liquid cooling, so output torque is maintained even in sealed cabinets. An enclosure rating of IP65 keeps dust and low-pressure water jets away from the stator laminations, reducing exposure in washdown areas. The windings use F-class insulation, allowing elevated internal temperatures during operation. For feedback, a multi-turn absolute encoder communicates over the EnDat 2.1 protocol, and within each mechanical turn the sensor provides 2048 increments for velocity loops and synchronized axis groups.

Installation uses flange mounting, providing a centered pilot and bolt circle that mates directly to gear reducers or machine frames without alignment shims. The plain steel shaft follows DIN tolerances, and the absence of a shaft sealing ring lowers friction in low-pressure environments. Power conductors exit on the B-side, separating them from the cooling connectors that use a 1/4-inch threaded port. Separating cable and coolant connections helps keep routing clear when the motor is installed near guards, gearboxes, or other tightly packed machine components. Standard rolling bearings and vibration level A balance keep radial runout within the limits of DIN EN 60034-14. Continuous operation is specified for ambient air from 0 to 40 °C, so the motor can run in ventilated cabinets without additional chillers.