Product Description:

The MAF130C-0200-FQ-M2-AH0-05-H4 is an asynchronous drive unit produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. The motor uses frame size 130 with length code C and is intended for flange installation on machinery that requires compact, high-torque rotation under controlled temperature conditions. By channeling coolant through threaded ports, it supports continuous operation in packaging lines, metal-working centers, and test stands where heat buildup limits conventional air-cooled units.

The cooling circuit relies on a 1/4-inch connection thread and removes heat directly from the stator, so the motor uses liquid cooling at the installation site. When paired with a compatible inverter, the rotor can sustain a rated speed of 2000 rpm while conforming to vibration level C with high-speed bearings. Environmental protection is provided by the sealed housing, which carries an IP65 rating, so dust and water jets do not reach the windings. Position feedback is transmitted through the EnDat2.1 serial interface, and the scanning disk yields 2048 increments per revolution for precise closed-loop control. The encoder electronics accept a 7–12 V supply, and the power connector is located on the A-side to shorten cable runs in confined cabinets.

The feedback device is a multi-turn absolute encoder, so the axis position remains available after power cycles. Class F insulation permits winding temperatures up to 155 °C, matching a permissible ambient range of 0 to 40 °C. A dedicated flange interface provides flange mounting with repeatable concentricity, and the output uses a plain shaft for direct coupling. Because the design is delivered without a holding brake and without a shaft sealing ring, external braking or sealing components must be added where load retention or fluid exclusion is required.