Product Description:

The MAF130C-0200-FQ-M2-AH0-05-A1/S039 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Designed as a drive element for automated machinery, the unit converts electrical power into continuous rotary motion for conveyors, gear stages, and other process equipment. Coolant channels built into the housing help stabilize operating temperature during duty cycles that exceed the limits of air-cooled designs.

Thermal management is based on liquid cooling, and the housing provides a 1/4 inch connection thread so standard fittings can be used. The power conductors terminate on side A through a sealed connector, and the fixed bearing on side A supports axial loads transmitted from the driven shaft. Encoder electronics operate from 7–12 V and report position through an EnDat2.1 interface; the built-in multi-turn absolute sensor delivers 2048 increments per revolution for precise closed-loop speed regulation. Internally, winding code 0200 sets the electrical constants, and insulation class F permits a maximum winding temperature of 155 °C during continuous service.

The mechanical envelope follows DIN EN 60034-14 and carries an IP65 protection rating, so the stator remains dust-tight and resistant to low-pressure water jets within the permissible ambient range of 0–40 °C. At a rated speed of 2000 rpm, vibration level A complies with standard balance quality for frame size 130 and length code C. The output shaft is plain and has no sealing ring, which reduces friction in applications that do not require shaft sealing. Installation uses flange mounting, and the F insulation system supports long service life under repeated thermal cycling. The motor is supplied without a holding brake, so stopping and holding functions must be provided externally.