Product Description:

The Bosch Rexroth Indramat MAF130C-0200-FQ-M2-AG0-05-N3 is an asynchronous motor in the MAF IndraDyn Asynchronous Motors series. Designed as a liquid-cooled housing unit, it drives machinery that requires continuous torque while keeping frame temperatures low in compact machine layouts. Mounted by a flange and coupled through a plain shaft, the motor converts drive controller output into rotational motion for conveyors, extruders, and other automated axes. Its integrated feedback and sealed housing support stable operation where load changes and long duty cycles are common.

Heat is removed by liquid cooling, and the coolant enters through a connection thread sized 1/4 inch. This connection supports standard fluid fittings and helps simplify integration into existing cooling circuits. The motor has a rated speed of 2000 rpm, which suits process equipment that must hold steady shaft speed under continuous operation. Position data is transmitted over the EnDat2.1 interface, and the integrated multi-turn encoder provides 2048 increments for closed-loop control. A 7 to 12 V supply powers the sensor, and the side-A power connector keeps power cabling separate from instrumentation lines. Standard bearings allow direct attachment to gearboxes or other driven machine elements without special support hardware.

The housing carries an IP65 rating, which helps block dust and low-pressure water jets during routine washdown. The motor is intended for ambient temperatures from 0 to 40 °C, and operation outside that range may require derating or external conditioning. Class F insulation supports winding temperatures up to 155 °C, while a shaft sealing ring helps prevent coolant or oil ingress at the output end. The motor also meets DIN EN 60034-14 balance criteria and has vibration level B, which helps limit mechanical disturbance during continuous duty. It is supplied without a holding brake, so power-off holding must be provided by the drivetrain or by an external brake.