Product Description:

The MAF130C-0200-FQ-M0-AK0-05-A1 is a liquid-cooled asynchronous motor manufactured by Bosch Rexroth Indramat and included in the MAF IndraDyn Asynchronous Motors series. Designed as a housing motor for industrial drive systems, it converts electrical power into rotational motion for automation axes that require steady torque while keeping stator temperature under control through an internal coolant circuit. Its construction allows direct attachment to machine frames and straightforward integration with drive controllers used in production cells, packaging lines, and material-handling equipment. This layout supports compact machine designs where stable thermal behavior and reliable continuous operation are important.

Heat is removed through liquid cooling, and the service ports use a connection thread that accepts a 1/4 inch fitting for closed-loop coolant plumbing. For mechanical integration, the motor uses flange mounting, so the frame aligns concentrically with gearboxes or direct-drive loads without additional brackets. The windings use insulation class F, which permits high thermal endurance in the stator, while the housing has an IP65 rating that helps block dust and low-pressure water jets. Power leads exit on the A-side through a keyed connector, and the coolant interface is arranged on the same side to keep cables and service lines grouped on one face of the machine.

The motor has a rated speed of 2000 rpm, and it is intended for operation in ambient temperatures from 0 to 40 °C. The shaft is half-key balanced to help limit residual vibration during rotation, and an A-side fixed bearing provides axial stability for the rotor assembly. The shaft also includes a keyway and a sealing ring to support secure power transmission and help prevent contaminants from entering the bearing area. Frame size 130 with length code C provides the required magnetic length, and the motor is supplied without a holding brake to keep rotating inertia lower during repeated start-stop duty.