MAF130C-0200-FQ-M0-AH0-05-R1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911310340
The Bosch Rexroth Indramat MAF130C-0200-FQ-M0-AH0-05-R1 is part of the MAF IndraDyn Asynchronous Motors series and features flange mounting and a plain shaft. This liquid-cooled asynchronous motor has an IP65 protection class, insulation class F, and a rated speed of 2000 min-1. It has a 1/4 inch cooling thread connection and is built to the DIN EN 60034-14 standard.
Internal Product Review
The MAF130C-0200-FQ-M0-AH0-05-R1 is a liquid-cooled asynchronous housing motor with flange mounting for clean mechanical integration. Liquid cooling and a threaded cooling connection support stable thermal performance in demanding duty cycles. IP65 protection and a 2000 rpm rated speed make the motor a strong choice for continuous industrial service.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130C-0200-FQ-M0-AH0-05-R1 is an asynchronous housing motor from Bosch Rexroth Indramat in the MAF IndraDyn Asynchronous Motors series. It is intended for industrial automation duties where the motor must deliver steady torque in compact machine spaces such as gearboxes, presses, and test rigs. Heat is removed through a closed coolant circuit rather than an external fan, which helps the motor operate in enclosed installations with limited airflow. This arrangement suits machines that cannot rely on free air circulation around the motor body. The housing format also supports direct installation on the machine, reducing the need for extra external motor hardware.
The stator jacket supports liquid cooling, and the coolant connection uses a 1/4 inch thread for standard hydraulic fittings. The motor has a frame size of 130 with length code C, which gives it the dimensional envelope associated with this housing size. Its nominal speed is 2000 rpm, and winding code 0200 matches inverter-based speed control in common industrial drive systems. The windings use insulation class F, which permits a thermal limit of 155 °C. Power is brought in through a sealed connector on the A-side, which keeps the electrical connection compact and protected.
The housing is rated IP65, which helps block dust and low-pressure water jets during washdown. The motor uses flange mounting and a plain shaft without a shaft sealing ring. It is supplied without a holding brake, so any static load-holding function must come from an external device. The permitted ambient operating range is 0 to 40 °C, and compliance with DIN EN 60034-14 places the motor in vibration level A for controlled running characteristics near connected components. That combination suits indoor industrial service where stable mechanical behavior is important around sensors, couplings, and attached drive parts.
