Product Description:

The MAF130C-0200-FQ-C0-DH0-05-H1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat in the MAF IndraDyn Asynchronous Motors series. It converts electrical energy into regulated mechanical power for industrial automation axes that must maintain constant torque under thermal stress. Its rotor design handles dynamic load changes common in conveyors, presses, and test stands, letting the motor maintain velocity accuracy under varying torque demand. This operating profile suits equipment that runs for long periods while still responding quickly to changing process loads.

At its rated speed of 2000 rpm, the motor sustains continuous operation while meeting vibration level A under DIN EN 60034-14. Thermal management is handled by liquid cooling, which circulates through a 1/4-inch connection thread and helps keep the winding temperature within the class F limit. The housing carries a protection rating of IP65, so dust and water jets do not reach the stator. High-speed bearings minimize friction losses at the design shaft frequency and support the plain shaft without a sealing ring. Position feedback is supplied by an incremental encoder that generates 2048 increments per revolution, allowing the drive controller to close speed loops with fine resolution. The right-side, turnable terminal box allows cable routing to match the available machine layout.

The encoder electronics operate from a regulated 5 V supply delivered by the drive, and the motor tolerates ambient temperatures from 0 to 40 °C without derating. Installation relies on flange mounting that mates the stator directly to the machine frame. Dimensional compatibility comes from frame size 130 together with length code C and winding code 0200, which supports matching the motor to available space and load requirements. The assembly is supplied without a holding brake and without a shaft sealing ring, so static load retention must be provided elsewhere when the shaft is stopped.