Product Description:

The MAF130C-0150-FR-S2-AH0-35-A1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled drive element, it supports conveyor segments, forming stations, and other machine axes that require steady torque at moderate speed. The motor integrates a single-turn absolute encoder for position feedback, enabling precise closed-loop control in industrial automation environments.

The motor uses liquid cooling routed through an enclosed rapid-action coupling on the stator jacket, and this arrangement removes heat at the winding surface during continuous duty. An IP65 enclosure blocks dust ingress and water jets, allowing installation near process fluids. Position feedback travels through an EnDat 2.1 interface, and the encoder provides 2048 increments for fine resolution in each revolution. Rated speed is 1500 rpm, which suits applications that need constant output on standard 50 Hz inverters. An A-side fixed bearing supports radial and axial forces, while the rotor design omits a holding brake to reduce length and inertia. Encoder electronics operate on a 7–12 V supply, and winding code 0150 matches the current limits of compatible drive modules.

The motor uses Class F insulation and complies with DIN EN 60034-14 vibration grade A, keeping imbalance low across the 130 mm frame. Coolant ports accept a 1/4 inch connector that mates directly with quick-lock hoses. Operation is permitted from 0 to 40 °C, allowing cabinet-level mounting without extra climate control. Power enters on the A-side through a sealed connector, which simplifies cable routing when the unit is attached by flange and foot mounting. A plain shaft without a sealing ring couples to the load, and frame length C keeps the housing compact while preserving thermal capacity.