MAF130C-0150-FQ-S2-AH0-05-A1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911333249
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF130C-0150-FQ-S2-AH0-05-A1 is part of the MAF IndraDyn Asynchronous Motors series, featuring liquid cooling and a flange mounting style. This IP65-rated motor has a plain shaft, a rated speed of 1500 min-1, and uses an EnDat2.1 single-turn absolute encoder with 2048 increments. It also comes with an A-sided fixed bearing, insulation class F, and a 1/4 inch connection thread for cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130C-0150-FQ-S2-AH0-05-A1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Engineered for automation cells that must remove heat quickly while maintaining constant torque, the unit fits into closed-loop drive lines on presses, material-handling gantries, and packaging machines. Its flange geometry aligns with DIN EN 60034-14, and an integrated single-turn absolute encoder simplifies pairing with digital drives by delivering position data without external transducers.
The motor reaches a rated speed of 1500 rpm, giving systems a predictable operating point for conveyor or spindle timing. A coolant jacket designed for liquid cooling attaches through a 1/4-inch connection thread, allowing process chillers to draw heat directly from the stator. Rotor position is reported through the EnDat2.1 interface, and the feedback device resolves movement into 2048 increments using a 7–12 V supply so drives can close velocity and position loops with fine granularity. The enclosure is rated IP65, and operation is permitted between 0 °C and 40 °C. Power conductors terminate on the A-side through a sealed connector, and the unit is supplied without a holding brake or shaft sealing ring.
A F-class insulation system supports winding temperatures up to 155 °C, matching the thermal demands of the liquid cooling circuit. Dynamic balance is designated as vibration level A, which helps limit transmitted vibration to adjacent bearings and mounts. The housing is prepared for flange mounting, and axial load is controlled by a radial-thrust A-side fixed bearing. A plain shaft profile accepts keyed or clamped couplings, while the absence of an internal brake leaves holding duties to the external drive and keeps rotating mass low for faster start-stop cycles.
Frequently Asked Questions about MAF130C-0150-FQ-S2-AH0-05-A1:
Q: What type of cooling does the MAF130C-0150-FQ-S2-AH0-05-A1 motor use?
A: This model features a liquid cooling system, enhancing thermal management during operation.
Q: What type of encoder and resolution does the MAF130C-0150-FQ-S2-AH0-05-A1 have?
A: A single-turn absolute encoder with 2048 increments is included for precise position feedback.
Q: What is the protection class for the MAF130C-0150-FQ-S2-AH0-05-A1 motor?
A: The protection class for this motor is IP65, providing dust tightness and protection against water jets.
Q: What is the mounting style of the MAF130C-0150-FQ-S2-AH0-05-A1?
A: Flange mounting is the specified mounting style for this MAF series motor.
Q: What type of shaft and shaft sealing does the MAF130C-0150-FQ-S2-AH0-05-A1 have?
A: A plain shaft type is used, and the motor does not include a shaft sealing ring.
