Product Description:

The MAF130C-0150-FQ-S0-BK0-05-N1 asynchronous motor is manufactured by Bosch Rexroth Indramat and belongs to the MAF IndraDyn Asynchronous Motors series. It is intended for drive tasks where constant torque and limited cabinet space are priorities in industrial automation cells. The unit uses flange mounting for direct coupling to machinery, which supports direct installation on the driven machine. It has frame size 130 with length code C, and a B-side power connector simplifies cable routing in compact layouts. Standard rolling bearings support the rotor, the design conforms to vibration level A, the windings use insulation class F, and the motor is supplied without a holding brake.

The motor uses liquid cooling for thermal management, making it suitable for high-duty operation where heat must be removed efficiently from the housing. Coolant is routed through a threaded coolant connection, allowing standard plant plumbing to be attached without special fittings. The housing has an IP65 protection class, which helps keep dust out and protects internal parts against low-pressure water jets. The motor runs at 1500 rpm, matching the 50 Hz winding code 0150 for four-pole inverter service. Mechanical and electrical tolerances follow DIN EN 60034-14, and a keyed shaft end transfers torque to the driven coupling.

The coolant ports use a 1/4 inch thread, which matches common hydraulic fittings used on industrial equipment. The rotor is balanced with a half key, and a shaft sealing ring helps keep coolant or process fluids out of the bearing cavity during operation. The motor is intended to operate in ambient temperatures from 0 to 40 °C, which suits typical indoor industrial conditions. These features support stable mechanical running and help the motor fit into machines that require sealed, liquid-cooled operation.