Product Description:

The MAF130C-0150-FQ-N0-AP0-05-N1 is an asynchronous motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Installed in conveyor zones, presses, or test stands, it provides continuous rotary power where variable-speed induction drive modules are used. The flange-mounted housing accepts coolant circulation, allowing the unit to deliver rated torque without enlarging the cabinet footprint. Its enclosed design also supports use in washdown or dust-laden production areas where exposed motor surfaces are more likely to collect moisture or debris.

The stator windings are kept within thermal limits by liquid cooling, channeled through a connection thread measuring 1/4 inch; this closed circuit pulls heat directly from the copper and minimizes fan noise. The motor has a frame size of 130 mm and length code C, which provides adequate iron volume for this housing size. At a rated speed of 1500 rpm, the rotor runs on standard bearings, and the shaft is keyed and balanced with a complete key to reduce torsional vibration. Electrical insulation is class F, so the winding can tolerate temperatures up to 155 °C without damaging the varnish system. Power reaches the stator through a connector on the A-side, which helps simplify cable routing and keeps the electrical connection in a consistent position on the housing.

The sealed aluminum body carries a protection rating of IP65, and all components operate in ambient temperatures from 0 to 40 °C. Residual oscillations are limited to vibration grade A, and the rotor is protected against lubricant ingress by a shaft sealing ring. The motor conforms to DIN EN 60034-14 for balancing, vibration, and noise. Because no encoder is installed and no holding brake is included, speed feedback and load holding must be handled by the drive or by external machine components.