Product Description:

The MAF130C-0150-FQ-N0-AG0-05-N1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. As a frame-size 130 unit with frame length code C, it delivers rotational power to conveyors, mixers, and other driven loads in automated cells where steady speed regulation must be combined with high thermal throughput. The asynchronous design is suited to inverter-fed applications that require continuous operation and stable torque across demanding industrial duty cycles.

Thermal management relies on liquid cooling, and the housing carries a 1/4 inch cooling port with a threaded connection that circulates coolant directly around the stator. An IP65 enclosure keeps dust and water jets away from the windings, while class F insulation tolerates winding temperatures up to 155 °C. The motor has a rated operating speed of 1500 rpm, which matches common 50 Hz drive outputs without overspeeding the rotor. It uses flange mounting for DIN-compatible machine interfaces, and the power leads exit on the A-side through a molded connector. The motor uses standard bearings and follows DIN EN 60034-14 for balance quality. Winding code 0150 is paired with a design that has no installed encoder, so the drive must use open-loop control or external feedback.

The output end uses a plain shaft with a shaft sealing ring to limit coolant or lubricant ingress. The motor is supplied without a holding brake, so any load that must remain fixed at standstill needs drive torque or an external holding device. Permissible site temperature ranges from 0–40 °C, which suits typical plant and machine-frame installations. The connector-style power interface keeps wiring compact, and vibration grade A helps limit dynamic loading on connected equipment during operation.