MAF130C-0100-FR-S2-GF0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911326528
The Bosch Rexroth Indramat MAF130C-0100-FR-S2-GF0-05-N1 is part of the MAF IndraDyn Asynchronous Motors series and features liquid cooling with a 1/4 inch rapid action coupling. It has an EnDat2.1 single-turn absolute encoder with a 2048 increment resolution and operates at a rated speed of 1000 min-1. The motor offers IP65 protection, flange mounting, and a plain shaft with a labyrinth seal.
Internal Product Review
The MAF130C-0100-FR-S2-GF0-05-N1 is a Bosch Rexroth Indramat liquid-cooled asynchronous housing motor with IP65 protection for dependable use in demanding machine environments. EnDat2.1 feedback and a 2048-increment single-turn absolute encoder support precise speed monitoring and clean integration with motion systems. Flange mounting with a turnable terminal box simplifies installation and rounds out a well-engineered motor package.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130C-0100-FR-S2-GF0-05-N1 is a liquid-cooled asynchronous housing motor manufactured by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. This unit is intended for inline installation on production machines where precise, slow-to-medium rotary motion is needed. In industrial automation lines, it drives extruders, mixers, or transfer tables, delivering constant torque while its cooling circuit transfers heat to an external exchanger so the drive inverter can operate the motor continuously without forced air. Its housing design also suits machine layouts that need dependable torque at modest shaft speeds.
Heat is removed through liquid cooling, routed through an enclosed rapid-action coupling sized 1/4 inch. This fluid path stabilizes stator temperature and helps protect the standard bearings during continuous operation. Power enters through a turnable terminal box on the left side, which simplifies cable routing inside a cabinet. Rotor feedback is provided by a single-turn absolute encoder that communicates through the EnDat2.1 interface, operates on a 7–12 V supply, and resolves motion into 2048 increments. The feedback system allows the connected drive to monitor rotor position during controlled motion. The 0100 winding code and C frame length support a rated speed of 1000 rpm, allowing stable operation across the permitted load range.
The enclosure carries an IP65 rating for use in wet or dusty environments. Continuous duty is permitted from 0 to 40 °C, and the windings use class F insulation to handle the thermal rise associated with high current density. Compliance with DIN EN 60034-14 establishes the vibration limits applied to nearby bearings and couplings. The motor has no holding brake, which reduces inertia where dynamic braking from the inverter is sufficient. Flange mounting aligns the 130 mm frame with standard gearboxes, and the plain shaft uses a labyrinth seal to help limit the entry of airborne contamination and coolant vapor at the output end.
